Catalog
Kosmo Solar and LONGi modules, Fox ESS inverters and energy storage from 0.7 to 136 kW, and PnTech solar cable. Factory-direct supply as an authorised dealer — from a single pallet to full container loads. Prices on request.
N-type TOPCon and monocrystalline PERC modules from 430 to 700 W. Wholesale shipping starts at one pallet — 33 to 37 modules depending on the model.
Flagship · TOPCon N-type · 20BB
Flagship module: up to 24.05% efficiency, low degradation, PID and heat resistance. Rear-side gain up to 9%.
TOPCon N-type · 210×182 mm cells
Up to 630 W at STC and up to 684 W with rear-side gain — the workhorse for ground-mounted plants and large commercial roofs.
TOPCon N-type · large cells
182×95.8 mm cells in a large format: maximum watts per square metre for ground-mounted plants and big roofs.
TOPCon N-type · 144 half-cells
The sweet spot of the line-up: up to 600 W at 32.5 kg. Universal for homes, carports and commercial plants.
Full Black · TOPCon N-type
All-black module: black frame and dark backsheet — the array reads as one graphite surface. For homes where the roof is part of the facade.
TOPCon N-type · compact format
Compact module for residential pitched roofs: 108 half-cells, from 24 kg, standard or reinforced glass.
Utility scale · HPBC 2.0 · bifacial
LONGi's flagship for ground mounts and trackers: back-contact cells, no front gridlines, dual glass and 75% bifaciality.
Rooftop · HPBC 2.0 · 28.5 kg
The top rooftop panel: single glass, 24.8% efficiency and five kilograms lighter than dual-glass modules of the same rating.
Bifacial · dual glass 2+2 mm
The same HPBC 2.0 cells in a dual-glass build: up to 70% bifaciality and no polymer backsheet to age.
The LONGi line-up has moved on: the Hi-MO 6 series was renamed Hi-MO X6 in 2023, and the current families are Hi-MO X6 Max and Hi-MO X10 for rooftops and Hi-MO 9 for industrial and utility plants. Below are the models most often ordered for projects. Figures come from official LONGi datasheets; datasheet revisions occasionally change the open-circuit voltage, so check the document for your specific shipment before sizing strings.
← scroll the table →
| Series and model | Power | Efficiency | Dimensions, mm | Weight | Warranty product / power |
Pallet / 40HC |
|---|---|---|---|---|---|---|
| Hi-MO X6 Max Explorer LR7-54HTH 455–465M |
455–465 W | up to 22.8% | 1800×1134×30 | 21.6 kg | 15 / 25 years | 36 / 864 pcs |
| Hi-MO X6 Max Scientist LR7-72HTH 620–630M |
620–630 W | up to 23.3% | 2382×1134×30 | 28.5 kg | 15 / 25 years | 36 / 720 pcs |
| Hi-MO X10 Explorer LR7-54HVH 475–490M |
475–490 W | up to 24.0% | 1800×1134×30 | 21.6 kg | 15 / 30 years | 36 / 864 pcs |
| Hi-MO X10 Explorer LR7-72HVD 625–645M |
625–645 W | up to 23.9% | 2382×1134×30 | 33.5 kg | 15 / 30 years | 36 / 720 pcs |
| Hi-MO X10 Guardian Light Design LR7-60HVHL 535–560M |
535–560 W | up to 24.8% | 1990×1134×30 | 16.3 kg | 15 / 30 years | 36 / 792 pcs |
| Hi-MO 9 LR8-66HYD 635–670M |
635–670 W | up to 24.8% | 2382×1134×30 | 32.7 kg | 12 / 30 years | 36 / 720 pcs |
| Hi-MO 7 LR8-66HGD 595–625M |
595–625 W | up to 23.1% | 2382×1134×30 | 33.5 kg | 12 / 30 years | 36 / 720 pcs |
A short note on choosing: for residential roofs people take the 54-cell 1800×1134 mm modules — twice as many fit a container (864 against 720) and one installer can lift 21.6 kg. For commercial roofs, the 72-cell modules at 625–645 W. Guardian Light Design weighs 16.3 kg instead of 28.5 and goes onto profiled sheet and light trusses without reinforcing the structure. Hi-MO 9 is for ground mounts and trackers, where watts per square metre matter most. Hi-MO 7 is chosen for the highest bifaciality in the range — 80% — which pays off on light ground, concrete and snow.
The full range from 0.7 to 136 kW, grouped by grid phase configuration — which is how they are actually chosen on site: single-phase or three-phase supply first, then array size. All series are original equipment with factory warranty.
For 220/230 V single-phase supplies: homes, small workshops and shops. The S, F and G grid-tied series work alongside the grid; H1/AC1 and KH/KA add storage and backup power.
Grid-tied · 1 MPPT
The most compact range: seven models from S700-G2 to S3300-G2. A 60 V start-up voltage means the array begins generating earlier in the day.
Grid-tied · 2 MPPT · battery ready
Two independent MPPT trackers and battery-ready design: add a Fox ESS charge controller later and the system expands without replacing the inverter.
Grid-tied · 3 MPPT
The top single-phase grid range: three MPPT trackers and 97.8% peak efficiency — for large homes and small commercial roofs.
Hybrid and AC · 2 MPPT
H1 works with panels and battery together; AC1 adds storage to an existing grid-tied system. Up to seven batteries in series — 33.24 kWh.
Hybrid and AC · 3 MPPT
Powerful single-phase hybrids with three MPPT trackers and parallel operation of up to ten units. KH works with a PV array, KA on the AC side only.
For 380/400 V three-phase supplies: commercial roofs, production sites, agricultural facilities and ground-mounted plants. T, V and R are grid-tied; H3/AC3 are hybrids with energy storage.
Grid-tied · 2 MPPT
The most widely used three-phase range: twelve ratings from 3 to 25 kW cover homes and smaller commercial sites.
Grid-tied · 3–6 MPPT · IP66
Commercial class: IP66 rating and C5 anti-corrosion class, with up to 40 A input current per tracker — compatible with large-format bifacial modules.
Grid-tied · 9–10 MPPT · IP66
Industrial range for large roofs and ground-mounted plants: up to ten MPPT trackers, per-string current monitoring, PID recovery and AFCI.
Hybrid and AC · up to 2 MPPT
Three-phase hybrid with energy storage and a backup output. Up to ten inverters in parallel, so the system grows with the site.
Lithium iron phosphate (LFP) storage — safe chemistry with no thermal runaway risk. Batteries stack in series: up to seven modules, 33.24 kWh in total. We also supply the P100 all-in-one unit, with inverter and battery in a single cabinet.
Hybrid inverter + LFP battery
All-in-one unit: inverter, charger and a 10.24 kWh battery in an IP66 enclosure. Backup in 4 ms, up to 3 MPPT trackers, parallel operation of up to 3 units, storage expandable to 30 kWh.
Six models on one platform — they differ in inverter power. The battery is the same: 10.24 kWh, expandable.
| Model | Power | MPPT |
|---|---|---|
| P100-5-H | 5 kW | 2 |
| P100-6-H | 6 kW | 2 |
| P100-7-H | 7 kW | 3 |
| P100-8-H | 8 kW | 3 |
| P100-9-H | 9 kW | 3 |
| P100-10-H | 10 kW | 3 |
Pricing depends on batch size and order mix — we send it in a written quotation within one working day.
H1Z2Z2-K photovoltaic cable by Zhejiang PnTech Technology, for the DC side of the system — from the modules to the inverter. Ordinary power cable will not do here: on a roof it has to survive UV, ozone, moisture and heat up to +90 °C for a quarter of a century. We stock the two working sizes, 4 mm² and 6 mm², in red and black.
The standard working size for strings on residential and small commercial systems.
For long runs and high-current strings, where 4 mm² would give noticeable voltage drop.
← scroll the table →
| Parameter | 1×4 mm² | 1×6 mm² |
|---|---|---|
| Designation | H1Z2Z2-K, single core | |
| Standards | EN 50618:2014 · IEC 62930:2017 | |
| Rated voltage | 1500 V DC · 1000 V AC | |
| Conductor | 56 × 0.285 mm | 84 × 0.285 mm |
| Conductor diameter | 2.4 mm | 3.0 mm |
| Outer diameter | 5.5 mm | 6.3 mm |
| Insulation / sheath thickness | ≥ 0.7 mm / ≥ 0.8 mm | |
| Resistance at 20 °C | 5.09 Ω/km | 3.39 Ω/km |
| Current, PnTech catalogue (60 °C) | 44 A | 57 A |
| Current, EN 50618, single cable free in air | 55 A | 70 A |
| Insulation and sheath | cross-linked polyolefin (XLPO), two layers | |
| Temperature range | −40 … +90 °C | |
| Resistance to | UV, ozone, moisture; halogen-free, low smoke, flame retardant | |
| Bending radius | at least 4 outer diameters | |
| Test voltage | AC 6.5 kV / 5 min · DC 15 kV / 5 min | |
| Service life | 25 years across −40…+90 °C (manufacturer's specification) | |
| Certification | TÜV SÜD no. B 121070 0001 to EN 50618:2014 (valid to 18.05.2028) · CE · CPR B2ca-s1a,d1,a1 · CQC | |
| Colours | black, red, brown, grey or to order | |
Two current ratings are given deliberately: the PnTech figure comes from the manufacturer's catalogue at 60 °C ambient, while the EN 50618 value is for a single cable free in air. Size your runs against the actual routing and temperature.
Not sure what fits your project?
Send us your market and volumes — we will reply with a tailored offer within one business day.
